Zoloto Valves

Product Details:

Features:

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Piston operated, hence more reliable than conventional diaphragm type PRV.
• Compact size, easy to Install.
• Diaphragm-less, Piston Type.
• Demands low maintenance and virtually noiseless.
• Provided with Premium Quality Nitrile Rubber ‘O’Rings.
• Facility provided to install a pressure gauge of 1/4″ BSP size to gauge the critically relevant outlet pressure.
• Designed to suit every application requiring accurate pressure ratings.
• All ‘O’ rings are of superior food grade material, hence ensuring absolute zero health hazard.

Sizes / Dimensions Materials

Additional Information:

• Item Code: 84818080
• Production Capacity: 1000
• Delivery Time: 7 DAYS
• Packaging Details: BOX TYPE

Product Details:

Salient Features

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Full Bore, Two Piece Design.
• Quarter Turn, Lever Operated.
• Provided with Forged Brass Hard Chrome Plated Ball.
• Premium Quality PTFE Gland Packing and Seating.
• Chrome Finish.

Product Details:

Salient Features:

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Piston operated, hence more reliable than conventional diaphragm type PRV.
• Compact size, easy to Install.
• Diaphragm-less, Piston Type.
• Demands low maintenance and virtually noiseless.
• Provided with Premium Quality Nitrile Rubber ‘O’Rings.
• Facility provided to install a pressure gauge of 1/4″ BSP size to gauge the critically relevant outlet pressure.
• Designed to suit every application requiring accurate pressure ratings.
• All ‘O’ rings are of superior food grade material, hence ensuring absolute zero health hazard.

Product Details:

SIZE :-8 MM TO 80 MM available

Product Details:

Salient Features:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Electrical Acuator Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Actuator is with position indicator and adjustable center stopper for both open and closed position.
• Compliant with B.M.S (Building Management System).
• Can be provided with extended wire for ease of installation.
• IP 67 protection available for outdoor application.
• Inbuilt micro switch position feedback.
• Input Voltage – 24/230 V power supply.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

Product Details:

Salient Features:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Lever Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

Product Details:

Salient Features:

• Design Standard IS 14846 PN 1.6.
• Bolted Bonnet, Inside Screw, Non-Rising Stem.
• Rigid and Sturdy design.
• Handwheel Operated.
• Flange Ends as per IS 1538.

Product Details:

Salient Features:

• Design standard API 594.
• Wafer Type Design, to take lesser space than the conventional Check Valve.
• Being light in weight, is more rigid than the standard Swing Type Check Valve, which needs expensive foundation and special supports.
• Being cylindrical body, stresses are uniformly distributed.
• Much longer seat life because of Bronze / S.S to Rubber contact.
• Less wear and tear of seat surfaces.
• End connections are designed to suit flanges drilled to ANSI B Class-125 / ASME B Class-150.
• Water hammering effect is minimized in this design, since the closing of valve does not depend upon any back pressure or flow.
• Each plate being half of the size of the swing check valve disc, provides straight flow path offering minimal resistance because of the spring’s assistance as closing of the valve initiates as soon as flow velocity dips below the designated minimum velocity.

Product Details:

Salient Features:

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Screwed in Bonnet.
• Suitable for both Horizontal and Vertical Lines.
• Permits flow in one direction and shuts automatically if the flow reverses.
• Disc is guided in Body as well as in Bonnet.
• Chrome Finish.

Product Details:

We " Shaivya Traders Private Limited " are leading wholesaler/ Distributor  of variety of Industrial Products in following products range as mentioned below:-


1  PIPE AND FITTINGS in MS , GI & SS :-
 A) MS (NUT & BOLTS , MS Pipes , Fittings )
 B) GI PIPES & FITTING ( ISI And Heavy Duty)
C) SS PIPES & FITTING (Imported)
D) PVC , UPVC , CPVC .


2 OIL SEALS
A) Imported and Indian( Rotary Shaft Seal , Radial Shaft Seal)
B) Front Seals ( V-Rings )
C) Wiper Seals & Mechanical Seals
D)  Hydraulic Seals 
E) Anti Vibration Pads , End Covers , Rubber Cords , O Rings and Other Rubber Products .


3 VALVES
A )  Types of Valves - Globe Valve, Gate Valve, Sluice Valve, Butterfly Valves , Ball Valve, Check Valves, Pressure Reducing Valve, Balancing Valves etc.
B) According to Medium - Water , Air , Steam, Oil , Gases.
C) According to Material - Bronze , Brass , Cast Iron , SG Iron , Stainless Steel, Cast Steel etc.
D) Applications- Plumbing , HVAC , Boiler Mountings & Fire Fighting etc
     Make: Zoloto/Marck/Sant/DRP/Audco/L&T valves.
4 HAND TOOLS AND POWER TOOLS
 A) Complete Range of Hand Tools Like Spanners , Torque Wrenches , Sockets , Hammer etc.
 B) Complete Range of Power  Tools Like  Blower  , Cutter  , Stone Cutter , Demolition Hammer etc.
      Make: Taparia/De-Neers/Venus/ Bosch etc.


5 HYDRAULIC AND PNEUMATIC PRODUCTS
A) Pneumatic Products :- Complete range of Solenoid Valves , Hoses , Pneumatic Cylinder ,PU Tube,  Vibrators , Gauges etc.
 

Additional Information:

• Item Code: 1009A
• Delivery Time: 7 Days

Product Details:

Salient Features:

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Screwed in Bonnet, Inside Screw, Non-Rising Stem, Integral Seat.
• Forged Brass Bonnet, Wedge, Stem and Gland Nut.
• Body designed for convenient fitting where space constraint is the factor.
• Designed sheet metal handwheel for a firm grip and convenient operation.
• Premium Quality PTFE Gland Packing.

Product Details:

Features:

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Screwed in Bonnet, Inside Screw, Non-Rising Stem, Integral Seat, Solid Wedge.
• Designed sheet metal handwheel for a firm grip and convenient operation.
• Premium Quality PTFE Gland Packing.
• Design Standard IS 778, Class-1.
• Provision for re-packing under pressure.

Material of Construction:

• Screw / Bolt Carbon Steel (Zinc Plated) IS 1367
• Washer Carbon Steel (Zinc Plated)
• Handwheel Sheet Metal (Power Coated)/ Cast
• Iron / IS 210 Gr. FG 200 1
• Stem Forged Brass IS 6912 Gr. FLB
• Gland Nut Forged Brass IS 6912 Gr. FLB
• Gland Forged Brass IS 6912 Gr. FLB
• Gland Packing PTFE BSEN 12086 –
• Stuffing Box Forged Brass IS 6912 Gr. FLB
• Bonnet Forged Brass IS 6912 Gr. FLB
• Body Bronze IS 318 Gr. LTB
• Wedge Bronze IS 318 Gr. LTB
• Name Plate Aluminum

Product Details:

Features:

• Screwed male end as per IS 554 / BS 21 / ISO 7.
• Chrome plated forged brass body and cover.
• Full bore.
• Sleek in design, ease of installation.
• Handy device used to release entrapped air in any piping system.
• Smooth inner valves reduce pressure loss.
• Maintains system flow efficiency.
• Brilliant aesthetic look.
• Ergonomic design.

Sizes / Dimensions Materials

Product Details:

Salient Features:

• Screwed male end as per IS 554 / BS 21 / ISO 7.
• Chrome plated forged brass body and cover.
• Full bore.
• Sleek in design, ease of installation.
• Handy device used to release entrapped air in any piping system.
• Smooth inner valves reduce pressure loss.
• Maintains system flow efficiency.
• Brilliant aesthetic look.
• Ergonomic design.

Product Details:

Salient Features:

• Flanged Ends to BS 10 Table ‘F’.
• Stainless Steel (S.S 304) perforated sheet screen ( Ø3 mm Perforation) is guided in body and cover.
• Large screening area makes the strainer efficient in performance.
• Minimum pressure drop inside the body due to streamlined body contours.

Additional Information:

• Production Capacity: 100
• Delivery Time: 1-2 Days

Product Details:

Salient Features:

• Screwed Female Ends to BSPT.
• Stainless Steel (S.S 304) perforated sheet screen (Ø1 mm Perforation) is guided in body and bonnet.
• Fine finish and smooth contours to minimize pressure drop inside the strainer.
• Large screening area makes the strainer highly efficient in performance.

Product Details:

Salient Features:

• Screwed Female Ends to BSPT.
• Stainless Steel (S.S 304) Ø1 mm perforated sheet screen is guided in the body and cover.
• Fine finish and smooth contours reduce pressure drop in the strainer.
• Large screening area makes the strainer efficient in performance.

Product Details:

Salient Features:

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Screwed in Bonnet, Integral Seat.
• Permits flow in one direction and closes automatically if the flow reverses.
• Metal Disc is mushroom shaped with spherical seating surface.
• Meant for Horizontal Lines only.
• Disc is guided in Body as well as in Bonnet.
• Medium Pattern.
• Also available with metal to metal seating.

Product Details:

Salient Features:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Electrical Acuator Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Actuator is with position indicator and adjustable center stopper for both open and closed position.
• Compliant with B.M.S (Building Management System).
• Can be provided with extended wire for ease of installation.
• IP 67 protection available for outdoor application.
• Inbuilt micro switch position feedback.
• Input Voltage – 24/230 V power supply.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

Product Details:

Salient Features:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Lever Operated.
• S.G Iron construction.
• S.G Iron disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

Product Details:

Features:

• Design standard API 594.
• Wafer Type Design, to take lesser space than the conventional Check Valve.
• Being light in weight, is more rigid than the standard Swing Type Check Valve, which needs expensive foundation and special supports.
• Being cylindrical body, stresses are uniformly distributed.
• Much longer seat life because of Bronze / S.S to Rubber contact.
• Less wear and tear of seat surfaces.
• End connections are designed to suit flanges drilled to ANSI B Class-125 / ASME B Class-150.
• Water hammering effect is minimized in this design, since the closing of valve does not depend upon any back pressure or flow.
• Each plate being half of the size of the swing check valve disc, provides straight flow path offering minimal resistance because of the spring’s assistance as closing of the valve initiates as soon as flow velocity dips below the designated minimum velocity.

Sizes / Dimensions: Materials

Product Details:

Salient Features:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Gear Operated.
• S.G Iron construction.
• S.G Iron disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

Product Details:

Salient Features:

• Design Standard BS EN ISO 17292 (BS 5351).
• Screwed Female Ends to BSPT / NPT / Socket Weld.
• Reduced Bore, Three Piece Design.
• Superb in Quality and Performance.

Product Details:

Salient Features:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Lever Operated.
• S.G Iron construction.
• S.G Iron disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS  6392 Table 17 and IS 1538.

Product Details:

Features:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Double Acting Pneumatic Actuator Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Actuator is with position indicator and adjustable center stopper for both open and closed position.
• Scotch Yoke Technology as the most suitable mechanism for valve and damper operation, producing higher torque at both end positions.
• Actuator is without  Rack and Pinion for smooth operation and longer life.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.

Materials

Product Details:

Salient Features:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Gear Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.